Concrete Driveways in Aurora — Poured, Stamped, Exposed
OCM Excavation & Construction pours concrete driveways across Aurora — from the 80-foot frontages in Bayview Glen and St. Andrew’s to the longer custom drives off the Wellington corridor and Aurora Estates. We handle the full job: curb cut coordination with the Town, sub-base excavation, drainage, forming, pour, and finish. One crew, one schedule, one number to call. For a free site visit anywhere in Aurora, call 416-317-3090 or use our online quote form. Most Aurora driveways are quoted within 48 hours of the site visit.
Concrete driveway styles we install in Aurora
Three finishes cover most of what Aurora homeowners ask for. Each one performs differently against York Region’s freeze-thaw cycles, and each one carries a different price band.
- Broom-finish poured concrete — the workhorse. Clean, modern, slip-resistant. The standard choice for Aurora Heights and Bayview Wellington bungalows where the driveway is functional, not the focal point.
- Stamped concrete — pattern-pressed to mimic flagstone, slate, ashlar, or cobblestone. Popular in Hills of St. Andrew and Aurora Estates where the drive needs to match a stone-clad façade.
- Exposed aggregate — top layer of cement paste washed off to reveal embedded stone. Natural texture, excellent grip on Aurora’s sloped lots. Lasts decades when sealed properly.
We also do integral colour, saw-cut control joints in custom patterns, and ribbon drives with grass or paver strips down the middle for the longer rural Aurora properties.
Our process — base prep is everything in Aurora
The driveways that fail in Aurora are the ones poured on weak base. Freeze-thaw will find every soft spot. Our process is built around getting the sub-base right the first time.
- Site visit + measure-up. We walk the property, check drainage flow, confirm whether a Town curb cut or widening application is needed, and flag any mature trees protected under Aurora’s Tree By-law 5850-16 (20cm DBH threshold).
- Excavation. We strip topsoil and dig down 8 to 12 inches depending on soil. Aurora’s north end runs to clay, which means deeper sub-base and better drainage.
- Granular base. Compacted Granular A in lifts, typically 6 to 8 inches finished. This is the part that protects the slab through 20+ Ontario winters.
- Forming and rebar. Pressure-treated forms, 10M rebar grid or wire mesh, fibre-reinforced mix on most jobs.
- Pour and finish. 32 MPa air-entrained concrete — the right mix for Ontario freeze-thaw. Broom, stamp, or exposed finish applied at the right stage.
- Cure and seal. Wet cure 5 to 7 days, then penetrating sealer. We don’t let you drive on it for 7 days minimum.
Curb cuts, widenings, and Town approvals
If you’re widening an existing Aurora driveway or installing a new one where none exists, the Town typically requires a curb cut permit and may flag the application for planning review based on lot coverage and front-yard landscaping ratios. We handle the paperwork, schedule the Town inspection, and coordinate the curb cut with our pour date so the new concrete tied into the boulevard is finished in one continuous edge — no cold joint at the sidewalk. On estate lots backing onto LSRCA or TRCA regulated lands, we also confirm there’s no setback issue before we form up.
Typical Aurora driveway costs
Real numbers from real Aurora jobs. Final pricing depends on access, soil, removal of the old driveway, and the finish you choose.
- Standard broom-finish replacement (tear-out + 500 to 700 sq ft): typically $14,000 to $22,000.
- Stamped concrete driveway (700 to 900 sq ft): typically $22,000 to $35,000 depending on pattern complexity and colour layers.
- Exposed aggregate (700 to 900 sq ft): typically $20,000 to $32,000.
- Long custom estate drive (1,500 sq ft and up): quoted on site — Aurora Estates and Hills of St. Andrew jobs vary widely.
Why Aurora homeowners hire OCM
We’re a GTA-wide excavation and concrete contractor working across 15 cities, with steady Aurora work. We own our excavators, our concrete trucks come from local York Region suppliers so the mix arrives fresh, and our crew is the same crew start-to-finish — no subcontracting the pour to someone you’ve never met. If you want stone or paver instead of concrete, ask about our interlocking paver driveways in Aurora.
Frequently asked questions
How long does a concrete driveway last in Aurora?
A properly poured concrete driveway in Aurora — 32 MPa air-entrained mix, 6 to 8 inches of compacted Granular A base, sealed and re-sealed every 3 to 5 years — should last 30 to 40 years. The failures we see at the 10-year mark are almost always base prep shortcuts, not concrete quality.
Do I need a permit to replace my Aurora driveway?
Straight like-for-like replacement at the same footprint usually doesn’t need a building permit. A curb cut permit from the Town is required if you’re creating a new driveway or widening the boulevard portion. Widening past existing lot-coverage limits can trigger planning review. We confirm before we quote.
How long before I can park on my new driveway?
Foot traffic at 24 to 48 hours. Light vehicles at 7 days. Heavy trucks, RVs, or trailers at 28 days minimum. Aurora freeze-thaw is hard on green concrete, so we stretch these windows in the shoulder seasons. Sealer goes on after the slab has cured enough — typically 2 to 4 weeks after pour.
Stamped versus exposed aggregate — which holds up better?
Exposed aggregate tends to wear better long-term in Aurora because the texture is the stone itself, not a coloured top layer. Stamped concrete looks sharper out of the gate and offers more design options, but the colour hardener and release agent will fade faster under salt and UV. Both are good — exposed is more forgiving over 20 years.
Can you match the existing concrete at my Aurora garage apron?
Colour and finish — yes, close. Exact match — almost never, because old concrete has weathered. We typically recommend either replacing the apron at the same time, or cutting a clean expansion joint at the garage face so the new pour reads as intentional rather than mismatched.
What time of year is best to pour in Aurora?
May through October is ideal. We can pour into early November with hot water in the mix and insulated blankets, but late-season pours add cost and risk. The worst time is the spring thaw window when the sub-base is still saturated. We schedule Aurora driveway pours around the forecast and the frost line.
Ready for a quote on your Aurora concrete driveway?
Call OCM Excavation & Construction at 416-317-3090 for a free Aurora site visit, or request a quote online. We’ll measure the drive, check the base condition, talk through finish options, and have a written quote in your inbox within 48 hours. Aurora homeowners — from Bayview Glen to Aurora Estates — call 416-317-3090 today.
Related Services in Auror
- Concrete Driveway in Newmarke
- Concrete Driveway in Burlington
- Concrete Driveway in Vaughan
- Concrete Driveway in Markham
- Interlocking Paver in Auror
- Demolition in Auror
- All Service Areas
in Aurora? Let’s talk.