Concrete Driveway & Walkway Installation in Oakville

OCM Excavation & Construction pours concrete driveways, walkways, steps, and garage slabs across Oakville — from the heritage lots of Old Oakville and Bronte to the wider builds in Glen Abbey, Joshua Creek, and River Oaks. We handle the Driveway Entrance Permit, the excavation, the 6 to 8 inch granular base, and the finish — broom, stamped, or exposed aggregate. Call 416-317-3090 for a site visit and a written quote on your Oakville concrete project.

Concrete services we deliver in Oakville

• Concrete driveways — full tear-out, regrade, rebar or fibre-mesh, 100mm slab on a compacted granular base.
• Walkways and front paths — 4-inch slabs with control joints every 1.2m to manage cracking.
• Stamped concrete — slate, ashlar, cobble, and wood-plank patterns sealed for Oakville winters.
• Exposed aggregate — washed finish with local stone, great traction on Bronte and lakefront grades.
• Concrete steps and landings — formed with proper risers, integral or stamped finish.
• Garage slabs — 5-inch reinforced pours with a 2% slope to the apron.

Oakville permits, bylaws, and what the Town actually checks

Concrete work in Oakville is more regulated than most homeowners expect. We pull and post the paperwork so the job doesn’t get red-tagged mid-pour.

• Driveway Entrance Permit — Required from Oakville Roads & Works any time the curb cut, apron, or boulevard portion is altered. Without it, the Town can order restoration at your cost.
• Maximum Driveway Width Bylaw — Oakville caps driveway width based on lot frontage. Older Bronte and Old Oakville lots often max out narrower than the homeowner wants; we measure before we form.
• Private Tree Bylaw — Any tree 15cm DBH (diameter at breast height) or larger on your property is protected. Removing or significantly damaging the root zone needs a permit, and fees apply per the current Town schedule.
• Site Alteration Bylaw 2023-047 — Excavation, grading, or fill changes typically need a Site Alteration Permit. Driveway re-pours that move grade trigger it.
• Lot Grading — Oakville enforces a 2% minimum slope away from the foundation with a 25mm tolerance on as-built grading. We shoot grades with a laser before and after.
• Conservation Halton — Properties near Sixteen Mile Creek, Bronte Creek, or the lakeshore fall inside a 15 to 30 metre regulated setback. Work in that zone needs CH approval.
• Frost depth — Ontario Building Code calls for 1.2m frost protection. Walkway and step footings extend below that line so nothing heaves over an Oakville winter.

Our process from site visit to final cure

1. Site walk and measurement — width check against the bylaw, tree DBH check, grading review, and a fixed-price written quote.
2. Permits — we file the Driveway Entrance Permit, Site Alteration if needed, and any CH or tree paperwork.
3. Locates and excavation — Ontario One Call ticket, then we strip 250 to 350mm of soil for driveways, less for walkways.
4. Base — 150 to 200mm of Granular A compacted in lifts to 95% SPD. This is where most failed driveways actually fail.
5. Form, reinforce, pour — fibre-mesh or 10M rebar grid, 32 MPa air-entrained mix for freeze-thaw resistance.
6. Finish and cure — broom, stamp, or expose, then cure compound and 7-day wet cure before traffic.
7. Seal — penetrating or film-forming sealer depending on finish.

Typical Oakville concrete pricing

Every Oakville lot is different — frontage, slope, tree protection, and apron length all move the number. As a rough range: a standard tear-out and broom-finish driveway runs $14 to $20 per square foot installed. Stamped concrete typically lands at $22 to $32 per square foot. Exposed aggregate sits in the middle. A front walkway is usually $2,500 to $6,000, and a set of three concrete steps with landing is typically $2,200 to $4,500. Permit fees are billed at cost.

Why Oakville homeowners hire OCM

We’re an excavation contractor first, which means the base under your slab gets built like it’s holding a foundation — not thrown together to hit a quote. We pull permits in our name, we shoot grades, and we don’t leave the boulevard a mess. See our excavation services, our Oakville excavation page, or if you’re weighing pavers instead, our Oakville interlocking paver page.

Frequently asked questions

Do I need a permit to replace my existing Oakville driveway?

If you’re touching the curb cut, apron, or boulevard, yes — a Driveway Entrance Permit from Oakville Roads & Works is required. If you change grade or widen the surface, Site Alteration Bylaw 2023-047 likely also applies. A like-for-like replacement that doesn’t alter grade or width sometimes doesn’t, but we confirm with the Town before quoting.

How wide can I make my Oakville driveway?

Oakville’s Maximum Driveway Width Bylaw caps width based on lot frontage and zoning. Older Bronte and Old Oakville lots are often the most restrictive. We measure your frontage and check the current bylaw before forming so the Town doesn’t force a cut-back after the pour.

There’s a mature tree near my driveway — is it protected?

Oakville’s Private Tree Bylaw protects trees 15cm DBH and larger. Removal or significant root-zone disturbance needs a permit, and fees are charged per the current Town schedule. We routinely adjust driveway alignment to stay outside the critical root zone instead of pulling a removal permit.

How long before I can drive on the new concrete?

Foot traffic at 24 to 48 hours. Light vehicle traffic at 7 days. Full design strength at 28 days. We use a 32 MPa air-entrained mix sized for Oakville’s freeze-thaw cycles, and we leave clear instructions for the cure window.

My property backs onto Sixteen Mile Creek — does that change anything?

Yes. Conservation Halton regulates a 15 to 30 metre setback from Sixteen Mile Creek, Bronte Creek, the lakeshore, and other regulated features. Excavation or grading in that zone needs CH approval before we touch ground. We’ve worked through CH permits on lakefront and ravine lots — plan on an extra 4 to 8 weeks if your project falls inside the regulated area.

Get a quote on your Oakville concrete project

If you’re ready to talk dates, call OCM at 416-317-3090 , or request a written quote through our free-quote page. We cover every Oakville neighbourhood — Old Oakville, Bronte, Glen Abbey, Joshua Creek, River Oaks, College Park, and the lakefront streets in between.

Related Services in Oakville

• Concrete Driveway in Newmarke
• Concrete Driveway in Burlington
• Concrete Driveway in Vaughan
• Concrete Driveway in Markham
• Interlocking Paver in Oakville
• Demolition in Oakville
• All Service Areas