Fence Installation in Aurora — Wood, Chain-Link, PVC

OCM Excavation & Construction builds residential fencing across Aurora — from Bayview Glen and Hills of St. Andrew through the Wellington corridor and the Bayview Wellington estates. We dig frost-rated post holes to roughly 4 ft, set posts in concrete, and finish with the material you choose: cedar board-on-board, pressure-treated, black chain-link, or PVC. Whether it is a backyard privacy run, a side-yard property line, or a Bylaw 6429-22 pool enclosure, call us at 416-317-3090 for an on-site quote.

Fence materials we install in Aurora

Aurora properties run the full spread — narrow infill lots near Yonge and Wellington, deep estate runs in Aurora Estates, and ravine-backing lots that touch LSRCA-regulated tributaries of the East Holland River. We match the fence to the lot.

• Cedar board-on-board and tongue-and-groove: the dominant privacy choice in Aurora Highlands and Hills of St. Andrew. Western red cedar resists rot, takes stain well, and ages to a silver-grey if left bare.
• Pressure-treated SPF: budget-friendly privacy and semi-privacy runs. Expect 15–20 years on a properly set post.
• Black vinyl-coated chain-link: the standard for rear ravine boundaries and dog runs. Disappears against trees, meets pool-enclosure spacing when paired with the right top rail.
• PVC / vinyl: white or almond, low-maintenance, popular in newer Bayview Wellington subdivisions. Comes in privacy, semi-privacy, and picket profiles.
• Aluminum picket: decorative front-yard runs and pool perimeters where you want sightlines without losing the 100 mm sphere rule.

Our Aurora fence-build process

Every fence install in Aurora follows the same sequence so nothing gets missed.

1. Site walk and line locate: we walk the property line with you, flag the run, and call Ontario One Call (ON1Call) for utility locates. Nothing gets dug until clearances are in.
2. Tree-protection check: Aurora’s Tree Bylaw 5850-16 protects private trees from a 20 cm DBH threshold. We route post holes around protected trunks where we can; if a permit is needed, we flag it before we start.
3. Post holes to frost depth: Aurora’s frost line sits around 4 ft. We auger to roughly 48 inches, set 6×6 or 4×4 posts on a gravel base, and pour high-strength concrete collars.
4. Framing and panels: rails, stringers, and pickets go on once the posts have set. Gates get heavy-duty hinges and a drop rod where the run calls for it.
5. Cleanup and grade restoration: we backfill, rake the line clean, and haul spoil off-site. You get the property back tidy.

Aurora fence height and pool-enclosure rules

Aurora’s residential fence rules sit inside Fence and Pool Enclosure By-law 6429-22. The short version most homeowners need to know: rear and side-yard fences are typically capped around 2.0 m, and front-yard fences are held lower so sightlines stay open. If you are enclosing a pool — anything where water depth can exceed 600 mm — the by-law requires a minimum 1.5 m fence on a single-residential lot, a 1.2 m horizontal setback from water edge, and no climbable members between 100 mm and 1.2 m off grade. Estate Residential and Rural zones under Zoning 6000-17 Section 4.12 add a 4.5 m rear-yard setback for the pool itself. We build to those numbers so the post-install inspection passes the first time.

Why Aurora homeowners hire OCM

• Frost-rated post depth. We do not cut the 4 ft hole short. Shallow posts heave by year three.
• Permit-aware crews. Pool enclosures, ravine-edge runs near LSRCA tributaries, and tree-bylaw conflicts are all called out before the dig.
• One company, fence to grading. If your line needs spoil removed, regrading, or a small retaining course at the bottom, the same crew handles it. Most fence-only contractors do not.
• Local to the GTA. We work Aurora, Newmarket, King, Richmond Hill, and the rest of the north York Region corridor every week. See the full service-area map.
• Companion trades. Building a deck behind the fence? Our Aurora deck-building crew sequences the two so you are not paying for two mobilizations.

FAQ — Fence installation in Aurora

How deep do fence posts need to go in Aurora?

Aurora’s frost line sits around 4 ft (roughly 1.2 m). We auger post holes to about 48 inches and set the posts in concrete on a gravel base. Anything shallower risks frost heave — by the third winter you start seeing posts lift, panels rack, and gates that no longer latch.

How tall can my Aurora fence be?

Aurora regulates fence height under By-law 6429-22. Rear and side-yard fences are generally allowed up to about 2.0 m, and front-yard fences are held lower to preserve sightlines. Pool enclosures on single-residential lots require a minimum 1.5 m. We confirm your specific zoning and corner-lot rules before we order material.

Do I need a permit for a backyard privacy fence?

A standard privacy fence inside the by-law height limit typically does not need a building permit, but it still has to meet By-law 6429-22 for setback and material. Pool enclosures always require a permit. If you are on a ravine lot near East Holland River tributaries, LSRCA approval may also apply. We flag all three before we dig.

What about trees on the fence line?

Aurora’s Tree By-law 5850-16 protects private trees from a 20 cm trunk diameter (DBH) and up. If your fence run passes within the root zone of a protected tree, we adjust the post layout, hand-dig around roots, or apply for the tree-injury permit before we start. We do not surprise you with a stop-work order.

How long does an Aurora fence install take?

A typical 100–150 ft residential run takes 2–4 working days once posts are set and concrete has cured. Cedar privacy on a standard suburban lot is usually a 2-day job. Pool enclosures with permits and inspections run longer because the inspector has to clear the perimeter before pool use.

Can you remove an old fence and install a new one?

Yes. We tear out the old fence, pull legacy concrete footings where possible, haul the debris off-site, and rebuild on a fresh line. If the old posts were set shallow or off the property line, we correct it on the new build. Call 416-317-3090 to book a site visit.

Ready for a fence quote in Aurora?

Tell us the run length, the material you want, and whether it is a property line, pool enclosure, or replacement. We will come out, measure, flag the line, and give you a written number. Call 416-317-3090 or request a free Aurora fence quote.

Related Services in Auror

• Fence Installation in Burlington
• Fence Installation in Newmarke
• Fence Installation in Vaughan
• Fence Installation in Toronto
• Deck Building in Auror
• Retaining Wall in Auror
• Interlocking Paver in Auror
• All Service Areas