Fence Installation in King City & the Township of King
OCM Excavation & Construction installs estate, equestrian, privacy and pool fences across King City, Nobleton, Schomberg, Kettleby and the rural Township of King. We’ve worked Richmond Hill and the north-GTA estate belt since 2008, and fence work in King City looks nothing like a 30-foot suburban backline — most of our King City installs run 500 to 2,000 linear feet across acreage, with paddock runs, ORM-overlay setbacks, and well/septic locates to deal with before a single auger hits dirt. Call 416-317-3090 for a site walk and quote.
Why fence installation in King City is different
King City sits inside the Township of King — not a “City of” — and that governance shapes every fence job out here. Lots are estate-scale (1 to 5+ acres is normal), so a typical King City perimeter is 500–2,000 linear feet versus the 100–200 feet we’d run on a Richmond Hill subdivision lot. That changes everything: material choice, post count, gate layout, equipment, and budget.
A few things you don’t run into on suburban jobs but absolutely run into in King City:
- Oak Ridges Moraine and Greenbelt overlays. Large chunks of King are governed by the ORM Area Zoning By-law 2005-23 and the Greenbelt Plan. Permeable cover rules and setback restrictions affect where posts and gates can go, especially on natural-core ORM land.
- Site Alteration By-law 2021-039. If your fence build also involves grade work, fill, or trenching that moves soil around, the Township’s Site Alteration By-law gets triggered. We’ve handled the King CityView portal side of that on several jobs.
- Fence By-law 2012-132 for pool enclosure. Any in-ground or above-ground pool in King needs an enclosure that complies with 2012-132 — height, gap, latch, and self-closing gate requirements. The pool fence isn’t the perimeter fence; it’s a second line and it has to be built right.
- Equestrian and paddock fencing demand. The King belt has working horse properties, and post-and-rail, wire mesh paddock, and electric perimeter fencing are core to that market. We install all three.
- Heritage Conservation District in the King City core. Streetscape rules can dictate fence height, material, and front-yard appearance near the heritage zone.
- Well, septic, and propane locates. Almost every rural King City lot is on private well + septic. Hitting a lateral or a well line with a post auger is a serious problem, so locates come before drilling — always.
King City neighbourhoods and rural areas we cover
- King City core — heritage-adjacent streets, larger village lots, mix of privacy cedar and decorative aluminum.
- Nobleton — estate subdivisions and rural concession-road lots, lots of long perimeter runs.
- Schomberg — village core plus surrounding farm and acreage properties; post-and-rail is dominant.
- Kettleby — small hamlet, heritage feel, low-profile fence styles tend to fit.
- ORM countryside — natural-core and natural-linkage zones where setbacks and material choice are tighter.
- Equestrian belt — concession-road horse farms north and west of King City, paddock and pasture fencing.
Types of fences we install in King City
- Wood post & rail — the King City classic. 2-rail, 3-rail, and 4-rail cedar or pressure-treated. Cheapest per linear foot for long estate runs, and the right look for paddock and pasture lines.
- Cedar privacy — 6 ft and 8 ft board-on-board or tongue-and-groove, common around pool decks, patios, and primary residence yards.
- Vinyl — low-maintenance privacy or semi-privacy, white or tan, popular in Nobleton subdivisions.
- Chain link — galvanized or black vinyl-coated for back-acreage perimeters, dog runs, and utility enclosures.
- Aluminum decorative — black estate-style picket, often used as a perimeter line or pool fence under 2012-132.
- Glass pool fence — frameless or semi-frameless tempered glass with stainless spigots, common on pool decks where the view matters.
- Composite — composite board fencing on engineered posts where homeowners want no maintenance and a privacy panel look.
- Custom estate gates — single or double swing, sliding, automated with keypad / fob / camera, with masonry or stone piers.
- Electric paddock fence — for working horse and livestock properties, tape, rope, or high-tensile wire with energizer setup.
Our fence installation process
- Site walk. We walk the full perimeter with you, mark gate locations, note grade changes, well heads, septic beds, propane tanks, and trees worth keeping. On long rural runs this is hours, not minutes.
- Survey + property line verification. Where the line isn’t obvious we pull the surveyor’s pins. On King concession lots a “guess” can put a fence 6 feet onto the neighbour — not a fight worth having.
- Township of King permits. Pool fences are reviewed against By-law 2012-132. Site alteration tied to grade work is filed under 2021-039 via the CityView portal. Heritage District streetscape sign-off if applicable.
- One Call locate + private locate. Public Ontario One Call for gas, hydro, telecom. Private locate for well lines, septic laterals, irrigation, and low-voltage runs — non-negotiable on rural King lots.
- Post layout. String lines, batter boards on long runs, gate-swing geometry checked, ORM setback compliance verified.
- Auger + sonotube to frost depth. OBC frost depth is 1.2 m in our climate zone, and that’s the minimum we set posts to. Sonotubes on structural posts, gate posts, and corners.
- Post setting. Concrete on structural posts, gravel-and-tamp on paddock runs where movement is expected.
- Rails, panels, gates. Built on-site for post-and-rail and cedar; pre-fab for vinyl and aluminum. Gate hardware spec’d to the gate weight, not whatever was in the box.
- Walk-through + warranty. Latches, swing, gaps, panel level. Then we hand it over.
What affects fence cost in King City
- Linear footage. The single biggest cost driver out here. 1,500 ft of post-and-rail is a different universe than 80 ft of suburban privacy fence.
- Material. Post-and-rail is cheapest per foot; cedar privacy mid-range; aluminum, glass, and composite are top end.
- Height. 6 ft costs more than 4 ft; pool-fence height under 2012-132 has minimum requirements you can’t dodge.
- Gate count and type. Manual single gates are cheap; automated double drive gates with stone piers and a camera intercom are not.
- Terrain. Rural King lots are often rolling. Stepped versus racked panels, slope grading, and rock in the ground all add hours.
- Pool fence layer. If you have a pool, you’re paying for two fences: a perimeter line, and a 2012-132-compliant pool enclosure.
- Site alteration tie-in. If the fence install is part of a bigger grading or excavation job, that gets handled under 2021-039 and quoted accordingly.
For broader fence info across the region see our fence installation across Toronto & GTA page. If you’re planning bigger sitework on the same property check our King City excavation services or our King City deck building page — we often combine fence, deck, and grading on the same mobilization to save you a second trip charge.
FAQ — Fence installation in King City
Do I need a permit to install a fence in King City?
A standard perimeter fence usually doesn’t require a building permit, but a pool enclosure does — it has to comply with Township of King Fence By-law 2012-132, covering height, gap, gate latch, and self-closing requirements. If your fence install also involves grade work, fill, or trenching, Site Alteration By-law 2021-039 may apply. We confirm what’s needed before we dig.
How deep do you set fence posts in King City?
Minimum 1.2 metres — that’s the OBC frost depth in our zone and we don’t go shallower. Structural posts, gate posts, and corners get sonotubes with concrete. Long paddock runs of post-and-rail often go gravel-and-tamp at depth because some movement in the ground is expected and easier to reset than a cracked concrete plug.
Can you handle 1,000+ linear feet of estate or paddock fencing?
Yes — most of our King City work is at that scale. We’ve installed long post-and-rail runs across Nobleton, Schomberg, and the concession roads around King City. We bring our own augers, mini-excavators, and crew for it, so we’re not waiting on rentals or sub-trades mid-job.
Do you do pool fences that meet King’s 2012-132 by-law?
Yes. Pool enclosures under By-law 2012-132 have height, vertical-gap, and self-closing self-latching gate rules, plus inspection. We build glass, aluminum, and cedar pool fences that pass — and we install them as a second line inside a perimeter fence when the property has both.
Call OCM Excavation & Construction at 416-317-3090 for fence installation in King City, Nobleton, Schomberg, Kettleby and across the Township of King.
Related Services in King City
- Fence Installation in Burlington
- Fence Installation in Newmarke
- Fence Installation in Vaughan
- Fence Installation in Toronto
- Deck Building in King City
- Retaining Wall in King City
- Interlocking Paver in King City
- All Service Areas
in King City? Let’s talk.